In this datasheet the reader can get explanation regarding specifications, accuracy, control register, pressure, supply voltage, pressure value, calibration, module address, temperature, sensitivity level, current, and typical application circuit. The datasheet tells us discussion such as mode, pressure measurement, standard mode, sampling accuracy, sheet, condition, absolute maximum ratings, property, resolution, sensor, and moisture sensitivity.
Lots of info related to device address, moisture sensitivity level, register, sensortec, high resolution, temperature data, oversampling, pressure sensor, conversion, measurement control register, pressure sampling accuracy, and control are explained in the datasheet. Here are taken from the datasheet:
The memory map below shows all externally accessible data registers which are needed to operate BMP180. The left columns show the memory addresses. The columns in the middle depict the content of each register bit. The colors of the bits indicate whether they are read-only, write-only or read- and writable. The memory is volatile so that the writable content has to be re-written after each power-on. Not all register addresses are shown. These registers are reserved for further Bosch factory testing and trimming.
Furthermore, this datasheet presents info around device, maximum ratings, digital pressure, register address, pin, oversampling setting, data registers, calibration data, sampling accuracy modes, application circuit, and temperature measurement.