Inside the product sheet you can learn explanation related to sensor, effect, core, selection guide, primary current, hall effect, open loop, current, information, and hall. There are lots of discussion related to voltage, loop, control, output, guide, output voltage, magnetic field, open loop current, field, and power are presented in the product sheet.
This product sheet contains explanation around range, ground, sensing, connector, loop current sensor, supply, offset, product selection, instructions, and open. Below are chosen from the product sheet:
The CSCA-A Series of open-loop current sensors are based on the principles of the Hall-effect wherein a Hall-effect device (HED) produces an output voltage linearly related to the amplitude and phase of a magnetic field applied to it. Current flowing through a primary conductor generates a rotating magnetic field around the conductor. This field is collector by a core of magnetically sensitive material and concentrated in the gap in this core. The HED is located in this core gap. Therefore, the HED output is directly proportional to the amplitude and phase of the primary current. The HED output is trimmed for gain and offset calibration such that the CSCA-A Series sensor provides a predefined output
sensitivity versus primary current.
In addition, this product sheet contains info about current sensor, application, temperature, type, specifications, gallant connector, loop current, product, and sensors.