This datasheet presents things regarding range, sensitivity, sensors, sensor, sample, and linearity. In the datasheet we can find description regarding measurement, sample rates, laser, ar600 sensor, and resolution.
Many explanation regarding accuracy, non volatile memory, displacement sensors, configuration, and distance are explained inside this datasheet. These are selected from this datasheet:
steel) Clear glass 0.0004 (polished fused silica) Laser Mirror 0.0004 Max sample rate (Hz) 1250 1250 1250 1250 600 1250 – 100 100 100 AR600 Inputs AR600 sensor command set through pushbutton or serial interface commands: Set Sample Interval between 0.2 to 1250 Hz Set Current Loop Span Current Loop ON/OFF Background Light Elimination ON/OFF Sampling ON/OFF Set Zero Point (to anywhere in measurment range) Set Baud Rate between 300 and 57600 baud Serial Flow Control ON/OFF Rev.12/11/03 Write Configuration data to non-volatile memory Read Configuration data from non-volatile memory Serial Output Control between inches / mm Initialize Configuration to factory defaults Set Sample Priority between Quality/Rate Set Serial Outuput between ASCII/Binary Take Single Sample (serial only) Page 3 AR600 Signal and Power Interface The table below shows the wiring of AR600 sensors ordered without power supplies.
Additionally, this datasheet tells the reader discussion about configuration data, output, interface, specifications, and sample rate.