This techinical information contains explanation around threshold linearity, tool, calibration, straight shank holder, direct mounting, permissible torque, element, machine, standard adapter, customized bed mounting, force, changing compression forces, knowledge, cable, thread adapter, connecting cable, adapter flange, integral flange, and coaxial mounting. Many explanation related to overload sensitivity threshold, operating temperature, male thread adapter, mounting, max permissible torque, overload sensitivity, press force, force distributing cap, sensor range, easy mounting, liability, adaptation, central ejection, accessory, riveting tool, current, calibrated measuring ranges, and products are explained inside this techinical information.
In this techinical information the reader can read things regarding customized tool, adapter, connector, deep drawing tool, sensitivity threshold, screw, compression forces, standard, force sensor, tool adapter, calibrated measuring, flange, information, drawing tool, shank holder, cheese head screw, sensor, and calibrating element. These are selected from this techinical information:
This device is a sensor calibrated in three ranges for measuring compression forces. The forces acting on the sensor produce in its piezoelectric element a proportional electric charge. This is fed via the 10-32 UNF connector and shielded cable to an amplifier for recording of measured values. A protector supplied as standard is very easily screwed onto the side connector for the cable. The press force sensor has top and bottom flanges that allow it to be mounted flexibly and easily in connecting rods or plungers. It can also be directly mounted at one end, using a fine female thread or the supplied cheese head screw with threaded bush.
Additionally, the techinical information gives you more about kistler products, kistler, joining processes, holder, force sensor type, centering ring, threshold linearity hysteresis, customized adaptation, press force sensor, calibration element, press, straight shank, technical changes, force sensor accessories, current state, punching tool, technical changes liability, and mounting screw.