There are lots of things around output, user, brake test, type, adjustment, sensing, user manual, equipment components, safety instructions, connection, and unit are presented in the user manual. In this user manual the reader can get things related to data, display, force sensor, instructions, pedal, display unit, resolution, current pedal, technical data, sensing range, and brake.
This user manual presents information about pedal force, pedal force sensor, vehicle, information, pin, brake tests, cable, batteries, signal transducer, equipment, and manual. The following are taken from this user manual:
The Kistler Pedal Force Sensor measures the force exerted on the brake pedal during brake tests. The Pedal Force Transducer mounts quickly and easily using a rubber strap. The sensor can be used with brake-test stands or directly during normal driving. Pedal force measurements are independent of the angle of the activation force. When the transducer is activated, the current pedal pressure will be displayed. If the switch is in the “Measure hold” position, the highest pressure that was obtained during the measurement is retained and displayed. The
measurement value is displayed in Newton units
Giving more content, this user manual explains discussion regarding components, signal cable, measurement range, data acquisition, measurement, range, safety, pintle force, sensor, force, and signal.