The installation guide tells you info regarding preferred carrier, smart sensor interface, product, male connectors item, power, pressure, certification requirements, tube, guide, shear valve, connecting pressure, electrical code, installation steps, pressure sensing port, safe, and valve. In the installation guide you can find things regarding male connector, sensor interface module, manual, wiring, installation, kit, sensor interface, components, pressure sensor, equipment, cord, publication, interface module, flow meter, and pressure sensing.
There are lots of information related to service, cable, sensor wiring, carrier, replacement, level, way calibration valve, pressure, wiring pressure, port, polarity, pressure sensor, sensor, system, field wiring, and requirements are described inside this installation guide. Here are excerpted from this installation guide:
Before installing this device, turn Off, tag/lock out power to the system, including console and submersible pumps. Determine which dispenser is closest to the tank being monitored. Remove that dispenser’s lower sheet metal doors to gain access to the vapor plumbing. Install Pressure Sensor (item 1 in Table 17-1) vertically to the dispenser frame or piping using the 2-inch conduit clamp, rubber shim, and necessary bolts, nuts, and washers from the included Universal Sensor Mounting kit. Wrap the rubber shim (item 10 in Table 17-1) around the sensor before inserting it into the clamp. Also make sure the sensor cable outlet is facing up and the pressure sensing port tube in the base of the
sensor is facing down.
Giving more content, the installation guide explains info about sensing port cable, device, pressure sensor installation, sensor mounting, sensor installation, smart sensor, calibration valve, instructions, sensing, wire, valve mechanism, item, copper tube, installation guide, and sensor installation guide.