This technical data contains things regarding beam, switch, applied force, time, resolution, and voltage. In this technical data the reader can find explanation like measuring, output, dynamics cart, strain gages, motion, and force.
There are lots of info related to mount, sensor, output voltage, experiments, collisions, and strain are presented inside the technical data. Below are chosen from the technical data:
The Force sensor with two ranges (0362bt) is a general-purpose device for measuring forces. It can be used as a replacement for a hand-held spring scale, can be mounted on a ring stand or on a dynamics cart to study collisions. It can measure both pulls and pushes. Forces as small as 0.01 N and as large as 50 N can be measured. The Force sensor uses strain gage technology to measure force, based on the bending of a beam. Strain gages attached to both sides of the beam change resistance as the beam bends. The strain gages are used in a bridge circuit such that a small change in resistance will result in a change in voltage. This voltage change is proportional to the change in force.
Furthermore, this technical data explains info about value, force sensor, sensitivity, collision, and range.