The datasheet contains discussion like speed, supply, sensor, analog output, measuring principle, and pulse. In the datasheet we can find explanation like connector, pulse duration, current, output, turbocharger speed, and signal.
There are many explanation about eddy current, maximum speed range, preamplifier integral, controller, turbocharger speed measurement, and preamplifier are explained inside the datasheet. The following are taken from this datasheet:
– Changing sensor without calibration Non-contact turbocharger speed measurement up to 400,000 RPM 1.) Operation with preamplifier integral cable with thermal protected braided hose DS05(xx) 0.5m (±0.15m) DS1 0.75m (±0.15m) sensor BNC cable, any length up to 25m DZ135 PC130-3 preamplifier DV135 2.) Operation without preamplifier integral cable with thermal protected braided hose DS05(xx) 0.5m (±0.15m) DS1 0.75m (±0.15m) sensor DZ135 CE 5.5(59) appr. 50g FSO = Full Scale Output Accessories PC 130-3, 3m Supply and signal cable tinned eds for feeding (open ends) analog output and 2 x TTL-signal on BNC connector CE135-10, BNC-cable, 10m Cable extension between preamplifier and controller, operation temperature up to 200°C CE5,5(59), cable extension only for use without preamplifier DZ135 0.75m ±0.15m Dimensions 4 Sensor DS05(14) Sensor DS05(03) M5 WS4 sensor cable ø appr.
Giving more content, this datasheet contains info around turbocharger, measurement, maximum speed, speed measurement, and speed range.